Associats of the Photonics Laboratory of Munich University of Applied Sciences

 

Head of the Laboratory

Room: C103

Email: roths @ hm.edu

Phone: +49(0)89 1265-1658

Prof. Dr. Johannes Roths

Full Professor: Department of Applied Sciences and Mechatronics

Course Advisor: Master program Photonics
Chairman of the Degree Programme Commitee Photonics : Master program
Spokesperson: Support program of the Munich University of Applied Sciences (FORWIN) "Forschungsfeld Photonik" (joint research Photonics)

Research: Fiber optic sensing, Fiber Bragg gratings

 
Teaching: Lectures and practical courses
  • Photonics Master: Electrodynamics - Quantum Theory and Photons (POM1)
  • Photonics Master: Micro and Fiber Optics (POM1)
  • Micro- and Nano Technology Master: Laboratory Course (MMN1)
  • Engineering Physics Bachelor: Introduction to photonics (PHB7)
  • Mechatronics / Precision Engineering Bachelor: Introduction to photonics (MFB5)

Permanent Staff Member

Room: C100a

Email: kuttler @ hm.edu

Phone: +49(0)89 1265-3656

Dipl.-Ing. (FH) Rolf Kuttler

Laboratory Engineer

Technical operations of the laboratory
Laser Safety Officer, General Safety Officer

Responsibility: Metrology and LabView Programming

 
Teaching: Practical courses
  • Engineering Physics Bachelor: Introduction to photonics (PHB7)
  • Mechatronics / Precision Engineering Bachelor: Introduction to photonics (MFB5)
  • Photonics Master: Micro- and Fiber Optics (POM1))
  • Photonics Master: Electrodynamics - Quantum Theory and Photons (POM1)

Research Assistants

 

Room: C100

Email: andrea.stadler @hm .edu

Phone: +49 (0)89 1265-3614

Andrea Stadler, M.Sc.

Doctoral Candidate


Research: Innovative turbomachinery for sustainable energy systems
  • Fiber optic probes for high temperature measurements in gas channels
Master thesis: Simultaneous temperature and strain sensing with RFBGs embedded in casted aluminum parts
Project work: Production of high temperature stable fiber couplers
Video:

 

Room: C100

Email: fabian.buchfellner0 @ hm.edu

Phone: +49 (0)89 1265-3654

Fabian Buchfellner, M.Sc.

Doctoral Candidate


Research: Functionalized multi-parameter Pi-shifted fiber Bragg gratings for hydrogen sensing with in-situ temperature compensation
Teaching: Practical courses
  • Photonics Master: Electrodynamics - Waves - Photons (POM1)
Master thesis: Development of fiberoptical sensor-arrays for the spatially high-resolved measurement of the radial total temperature profile at the compressor outlet of an aircraft engine
Project work: Micro-oven setup for regeneration of Bragg gratings with improved mechanical strength

Room: C100

Email: alexander.roehrl @ hm.edu

Phone: +49 (0)89 1265-3614

Alexander Röhrl, M.Sc.

Doctoral Candidate


Research: Direct inscription of fiber Bragg gratings using a femtosecond laser
Teaching: Practical courses
  • Engineering Physics Bachelor: Introduction to photonics (PHB7)
  • Mechatronics / Precision Engineering Bachelor: Introduction to photonics (MFB5)

 

Students:

Room: C100a

Email: fischer . philipp@hm.edu

Phone: +49 (0)89 1265-3655

Philipp Fischer, B.Eng.

Master course student: Photonics




Master thesis: Design and construction of a unit for the localisation of fibre Bragg gratings

Room: C100a

Email: letzel @ hm.edu

Phone: +49 (0)89 1265-3655

Lando von Etzel

Bachelor course student: Bachelor course student: Engineering Physics




Bachelor thesis: Time-dependent hydrogen diffusion in palladium coatings of fiber Bragg sensors

 

Former Colleagues:
For inquiries, please contact: Rolf Kuttler

Email: kuttler @ hm.edu

Phone: +49(0)89 1265-3656


Simon Zehetmair, B.Sc.

Master course student: Photonics




Bachelor thesis: Development of an Imaging-Setup for fs-Laser Material Processing

Bianca Trautwein, M.Sc.

Researcher


Research: Inscription of fiber Bragg gratings and micro machining of optical fibers with a fs-Laser
Master thesis: Fabrication of fibre Bragg gratings with a novel fifth harmonic nanosecond pulse Laser by 213 nm and comparison with the fabrication process of a nanosecond pulse Excimer Laser by 248 nm
Project work: Development of novel optical fiber acceleration sensors

Fabian Moos, B.Sc.

Bachelor course student: Ophthalmic Optics / Optometry




Bachelor thesis: Characterization of RFBG-sensorarrays with high spatial resolution

Dr.-Ing. Qiang Bian

Researcher


Doctoral thesis: Fiber Bragg Grating Sensors for High Temperature Metal Casting and Health Monitoring of Metal Structures
Research: Optimization and characterization of regenerated fiber Bragg grating and its measurement technique
Fiber Bragg Grating Sensors for High Temperature Metal Casting and Health Monitoring of Metal Structures

Julian Nicolai, B.Eng.

DAAD RISE Exchange student: Photonics




Research: Pi-shifted fiber Bragg gratings for decoupled temperature and hydrogen sensing; fitting algorithms and parameter extraction

Fan Zhang, Master of Material Science and Engineering

Exchange student: Photonics




Research: Pd-based optic fiber hydrogen sensors

Alexander Podhrazsky B.Sc.

Master course student: Photonics




Project work: Strain measurement in copper casting and aluminum specimen with RFBG sensors
Bachelor thesis: Strain measurements on aluminium tensile specimen with embedded Fibre-Bragg-Grating sensors at different temperatures

Fiedler, Sebastian, M.Sc.

Master course student: Photonics




Master thesis: Highly sensitive indentation measuring station based on Fiber Bragg gratings with π-phase offset in polarization-preserving fibers for investigation human cartilage samples
Project work: Setup force measuring station for highly sensitive force measurements

Dr.-Ing. Franz J. Dutz

Post Doc Researcher



Doctoral thesis: Faseroptische Multipunkt-Sensornetzwerke zur Messung von Hochtemperaturverteilungen in Gasturbinen und chemischen Reaktoren
Research: High temperature fiber optic sensor networks, laser machined micro-structured FBG
Project work: Simulation and measurement of Ge-diffusion induced drift of regenerated fiber Bragg gratings
Bachelor thesis: Construction of a measuring testbed for temperature calibration of regenerated fibre Bragg grating (RFBG) sensors

Dr.-Ing. Markus Lindner

Post Doc Researcher


Doctoral thesis: High-temperature sensor technology using regenerated fibre Bragg gratings in aluminium casting
Master thesis: Numerical 3d simulations of Panda fibers under strain and temperature influence
Project work: FEM model of free Panda fibers

Maximilian Franz Hennesen, B.Sc.

Bachelor course student: Engineering Physics




Project work: Investigation of the temperature characteristics in the wavelength range from 1465nm to 1605nm

Juenger, Jonathan Daniel Dennis, B.Sc.

Master course student: Photonics




Project work: π-FBG as a force sensor

Perekhodko, Evgeny, B.Sc.

Master course student: Mikro- und Nanotechnik




Project work: Tensile tests FBG in Al & Cu

Evelyn Niedermaier, M.Sc.

Master course student: Photonics




Project work: Simulation und Herstellung von pi-shifted FBG

Dennis Maximilian Schenk, M.Sc.

Master course student: Photonics




Project work: Characterization of regenerated fiber Bragg gratings in large mode area fibers

Georg Hamann, B.Eng.

Master course student: Photonics




Master thesis: Micro-oven setup for regeneration of Bragg gratings with improved mechanical strength
Project work: Characterization of free and embedded RFBG sensors in an SM250 fiber

Nam Tran, B.Sc.

Bachelor course student: Optoelectronics


 

Bachelor thesis: Production of fiber couplers

Jill Kaindl, M.Sc.

Scientific Assistant



Research: Force sensor with enhanced sensitivity based on Pi-shifted FBGs within a partly fs laser structured cladding

Hepp Kathrin, B.Sc.

Master course student: Micro- and Nanotechnology


 

Master thesis: Photoluminescence spectroscopy of fiber bragg gratings (Cooperation with INRS,Canada Prof. A. Rüdiger)
Project work: Characterization of the strain sensitivity of regenerated fiber bragg gratings
(Cooperation with INRS,Canada Prof. A. Rüdiger)

Daniel Bernard, B.Sc.

Master course student: Photonics


 

Project work: Optimization of the mechanical strength of LMA glass fiber
Bachelor thesis: Determination of force sensitivity of regenerated fiber Bragg gratings at different temperatures

Dr.-Ing. Barbara Hopf

Post Doc Researcher


 

Doctoral thesis: Fiber Bragg grating based multi-parameter measurements for applications in power generators
Master thesis: Multi-parameter sensing with tandem-FBGs

Dr. rer. nat. Gabriele Marchi

Post Doc Researcher


 

Research: Innovative arthrosis diagnostics with FBG-indentation

Atefeh Javadzadeh Kalahrodi, M.Sc.

Master course student: Abbe school of Photonics, University Jena


 

Master thesis: Three-dimensional mapping of the stiffness of bovine and human cartilage
Project work: Investigation of biomechanical behaviour of the cartilage by using the FBG sensor Atefeh Javadzadeh

Dr.-Ing. Leonhard Polz

Post Doc Researcher


 

Doctoral thesis: Regeneration of fiber Bragg gratings in polarization maintaining fibers
Master thesis: Investigations on the Formation of Regenerated Fibre Bragg Gratings


 

Wittmann Sami
Möller Janek
Ulaganathan Keerthanan
Samaras Lukas
Schmalen Lisa
Pritenacher Johnathan
Micallef Wassily
Beck Marcel
Canti Okay
Sailer Bettina Birgit Andrea
Hauptenbuchner Stefan
Pazooki Ehsan
Tunc Edis
Ulucay Atahan
Schellhorn Undine-Elise
Wittmann Sami
Baier Valentin
Stephan Valentin
Nguyen Martin
Memmi Helmi
Kwossek Mathias
Eitzenberger Michael Martin Karl
Fischer Bennet
Mack Heiko
Steinkopff Albrecht
Jarsen Andreas
Brehm Jens Jürgen
Breuer Maximilian Jakob
Mangstl Martin
Allnoch Dominik
Jost Michael
Eberhard Evelyn Emilia
Modlinger Richard Rasso
Daitche Alexej
Dörfler Andreas
Nguyen Duy Quang
Paulus Daniel
Kesim Ceyhun
Bode Daniel
Weber Robert
Mohseni Mojtaba
Klose Markus
Krieg Manuel
Polz Leonhard
Djordjevic Sasa
Segl Sebastian
Singh Paul
Berghaus Tasja
Berrang Bianca
Waimer Steffen
Moshrefzadeh Maryam
Aulbach Laura Maria
Lugauer Florian
Freudling Maximilian
Wilfert Andre
Heßke Andre
Hülsenbusch Thomas
Kreul Kilian
Jülich Florian
Kratzer Peter
Pierer Jörg
Sudan Christoph